CrisisHQ

Make a household water storage plan

Work out how much water to store, where it will go, and how you will use it. Write down the answers as you go.

1. Set your target

Allow at least 1 US gallon (3.8 L) per person, per day for drinking, food preparation, and limited hygiene. Add water for pets, heat, pregnancy, illness, and other needs. Normal showers and toilet flushing need a separate supply.

Start with three days, then build toward two weeks. CrisisHQ uses 30 days as a longer-term planning goal; build toward it as space and budget allow.

Example: Four people × 30 days × 1 US gallon = 120 US gallons (about 454 L) before extras. That is 24 filled 5-US-gallon (18.9 L) containers, or an equivalent mix of smaller containers and bottles.

Calculate your household target →

2. Count what is ready

Add up unopened bottled water and safe water already stored in suitable containers. Empty containers do not count. Subtract the water you have from your target to find the gap.

Write down: target ___; stored ___; still needed ___. Use the same unit for all three.

3. Choose containers and a place

A 5-US-gallon (18.9 L) container holds about 42 lb (19 kg) of water, plus the container’s weight. Use smaller containers if you cannot move or pour that safely. Keep some water ready to carry if you must leave.

Choose a cool place away from sunlight, fuels, and cleaning chemicals. Check the floor or shelf can support the full load: the example above weighs about 1,000 lb (454 kg) before containers. If you do not know the load limit, ask your building manager or a qualified professional before installing a large tank.

Stack filled containers only when the manufacturer permits it, within its stated limit. Put large containers in their final supported location before filling.

4. Fill, label, and test

Clean and fill your containers →

Label each with the filling date and next replacement date. Replace home-filled water every six months, or sooner if the container maker requires it. Follow the printed date and storage instructions for commercially bottled water.

Test the spigot or hand pump without mains electricity. Make sure a clean receiving jug fits under the outlet and that you can drain the container for refilling.

5. Plan your next supply

Save your water provider’s alert page and phone number. Decide who will collect water, which containers and transport they will use, and where you could stay if a safe supply is unavailable. During an emergency, confirm the collection location is operating and its water is approved for drinking before travelling.

If the water goes out or a notice is issued

Check the notice for your address. If the supply is still confirmed safe and water use is permitted, fill clean, sanitized drinking-water containers. If safety is uncertain, use your safe reserve while checking the notice.

NoticeWhat to do
Boil waterUse bottled water, an unaffected safe reserve, or water boiled as directed. A pitcher or refrigerator filter does not replace boiling. Boiling instructions →
Do not drinkUse bottled water or an approved alternative for drinking, food preparation, brushing teeth, and ice. Check the notice for bathing and washing. Boiling does not fix chemical contamination.
Do not useStop using the affected tap water for any purpose. Use an alternative supply approved for the incident.

During any advisory, do not use water or ice from appliances connected to the affected water line.

Keep water stored in an ordinary bathtub for toilet flushing, and only when the water notice and sewer operator allow it. Keep children and pets away.

Restored power or pressure does not mean the water is safe. Wait for the notice to be lifted and follow any flushing instructions.

Next task

Clean and fill containers →

Browse Water products →

Sources

Reviewed November 21, 2026.