CrisisHQ

Clean and fill drinking-water containers

Use these steps for portable containers you can safely close, turn, and drain. Start with a food-grade container made for drinking water. Never reuse a container that held fuel, bleach, pesticides, or other toxic chemicals.

For a large or fixed tank, use the maker’s cleaning and sanitizing procedure for the tank, fittings, and hoses. This portable-container recipe is not a tank-disinfection procedure.

Get these supplies

  • Your container and lid.
  • Dish soap and water for washing.
  • Plain, unscented household chlorine bleach labeled 5–9% sodium hypochlorite. Do not use scented, splashless, color-safe, or cleaner-blended products.
  • A measuring teaspoon, a measuring jug, and a timer.
  • Water that is safe to drink, plus a label and marker.

Clean and fill

This bleach mixture sanitizes the empty container. Pour it out before filling. Do not drink it or use this recipe as a drinking-water treatment dose.

Work with good ventilation. Follow the bleach label’s handling precautions and never mix bleach with other cleaners.

  1. Wash. Clean the container and lid with dish soap and water. Rinse away all soap. Clean and sanitize removable spigots and seals as the container maker directs.
  2. Mix. Add 1 measuring teaspoon (about 5 mL) of the specified bleach to 1 US quart (4 US cups; about 0.95 L) of water in the measuring jug. Do not guess the bleach strength or substitute a different recipe.
  3. Wet every inside surface. Pour enough mixture into the empty container to coat its inside. Close it tightly, then turn or shake it until the mixture reaches every inside surface, including the lid. Keep all those surfaces wet for at least 30 seconds.
  4. Empty. Pour out the sanitizing solution. Let the container air-dry, or rinse it with water that is safe to drink.
  5. Fill and close. Fill with safe drinking water. Avoid touching the inside of the lid or container. Close tightly and check for leaks. If you need a hose, use one rated for drinking water and keep its ends clean.

Municipal tap water that is already treated and currently safe to drink needs no additional treatment before going into the sanitized container. If your source is untreated or its safety is uncertain, choose the appropriate treatment first →. Boiling and chlorine do not make water contaminated with fuel or toxic chemicals safe.

Label, store, and replace

Write “Drinking water,” the filling date, and the next replacement date on the container.

Replace home-filled water every six months, or sooner if the container maker requires it. Set a reminder now. Empty, clean, sanitize, and refill using these steps. For commercially bottled water, follow the printed date and storage instructions.

Keep containers cool and out of direct sunlight, away from fuel, pesticides, and cleaning chemicals. Check for leaks or damage when you inspect your supplies.

Keep stored water clean

Pour water out or use a clean spigot or drinking-water pump. Keep hands, used cups, and dirty hose ends out of the water. Keep the lid closed between uses.

Store newly treated water in a clean, sanitized container too. Keep untreated water and its collection equipment separate from your drinking-water supply. Label non-drinking containers “Not for drinking.”

Next task

Work out how much to store and where →

Browse Water products →

Sources

Reviewed November 21, 2026.

Find a previously listed product